Are you annoyed by the leaky showerhead in your bathroom but don’t know how to fix it? Maybe your showerhead leaks even after you turn off the shower faucet. Don’t worry. We have some great plumbing tips to help you fix your leaky showerhead. Not only will it give you peace, but it will also save you money.
Plumbing Tips: What is the Cause of Your Showerhead Leaks?
There are many reasons your showerhead might be leaking. Leakage could be caused by damaged inner seals. Sometimes, however, showerheads leak because the shower washers have begun to separate. It could also be due to a blockage in the showerhead, causing water to stop flowing.
Leakage of a showerhead for too long can lead to water damage and an increase in your monthly bills. It’s best to repair it immediately. These are the steps you need to follow to fix a leaking showerhead.
Turn off the water supply.
To avoid unpleasant surprises, shut off the water supply before you start. This could be as simple as turning off the water from the outside. You can easily remove the showerhead once it’s turned off, but make sure to tell the people in your home about it.
Disconnect your showerhead and hose from the showerhead
If your showerhead is one that screws onto the threaded end, it will be simple to remove. If your showerhead is an older model, adjustable pliers and/or a wrench may be required to take it out. When removing the showerhead, make sure you do not lose the rubber washer or other similar parts. You will need them later when you place the showerhead back.
Clean your showerhead
Have a look at the showerhead. Is there any dirt or grime on your showerhead? This could be the reason water isn’t flowing. Take some vinegar and pour it into a bucket. Then, let the vinegar soak into your showerhead for a while. You should allow your showerhead to soak for at least half an hour.
Verify that the rubber washer is still in good shape.
This is the part that prevents water from leaking between your showerhead hose and showerhead. You should check that your rubber washer has not become worn or damaged as this could cause a leak. It’s best to replace it if it appears damaged. To replace the rubber shower, take it to your local hardware store. Using a high-quality rubber washer is always recommended.
Test the valve
You should also check the valves on your shower taps to ensure safety. Two taps should be connected to your shower. One for hot water and one for cold water. To check if there is any leakage, you should inspect both taps. You should also replace any damaged valves.
Attach the showerhead once more
You will now attach the rubber showerhead. Next, attach the new rubber showerhead. Make sure you attach everything correctly and don’t forget any parts.
Turn on the water
After you’re sure everything is attached correctly, you can turn on the water again. You will see that your showerhead is completely sealed after you’ve done this.
How to Unclog Your Shower Drain?
Did you ever notice that water collects at your feet while you take a shower? That feeling is not something anyone likes. If you feel that way, it may be time for you to clear out your clogged shower drain.
There are many reasons shower drains can get clogged. Shower drains can become clogged for a variety of reasons. The most common reason is hair getting caught in the drain. There are other reasons a drain could become blocked, including minerals from hard water or soap scum.
How do you clear a blocked shower drain? These are some simple tips that you can use to unclog your shower drain before calling a professional.
You can use your hands to get rid of any hair clogging the drain. To get any items out of the drain, you will need to take off the drain cover. Removing hair from a dry drainage drain is the easiest way to do so. Wait until you have taken a shower before trying to do this.
You can use a wire hook, a plunger, or a drain snake to help you remove hair from your drain. Flexible and retractable, a drain snake can be found in most hardware stores. To remove clogs from drains, you can insert a wire into them.
After the hair and visible clogs have been cleared, you can pour boiling water down the shower drain to loosen any soap scum. Boiling water can be used to dissolve soap scum and minerals from hard water. This may require repeated steps.
Hot water may not be enough to solve the problem. You can purchase chemical drain cleaners at the grocery store like Drano. However, you can make your own drain cleaner using common household ingredients you already have. You can try pouring vinegar and baking soda down your drain. Let the 3/4 cup baking soda go down the drain. Then let it sit for about a minute. This will allow the baking soda to settle in the drain. Next, pour 1/2 cup distilled white vinegar down your drain. Follow it with 1/2 cup boiling water. The chemical reaction of vinegar and baking soda can break down the buildup in your shower drain.
If none of these methods work, or if there is still a blockage further down the drain, you may need to call a professional. Plumbers can quickly clear your drains using tools and techniques that you might not have at home.
Call Blue Ribbon Plumbing LLC now if you need help with your plumbing system. Our team is always ready to assist you.
Like our Facebook page for more great info about plumbing services.