How To Avoid Disasters When Doing DIY Plumbing

plumbing contractor

plumbing contractorAlthough fixing your own plumbing system seems to be a fantastic DIY project, it does not take much for a simple plumbing repair to turn into a full-fledged plumbing disaster. When this happens you will have to call a professional plumbing contractor. So, before you get started, here are a few tips you need to know before you begin your DIY plumbing project.

What You Need To Know

There are certain DIY projects that are fun and rewarding to do even if it is your first time to do it and you just learn as you go. So what about plumbing? Learning how to repair leaks and change fixtures can save you a considerable amount of cash, however, your DIY plumbing can become a disaster quickly if you don’t practice caution. While there are problems that can be avoided, there are plumbing nightmares that are inevitable especially if your plumbing system is old and outdated or poorly installed. Even so, there are things you can do to address the problems before they start or less the chaos when the problem starts begins to unfold.

Where are your shut-offs?

This is very important. Before you begin any DIY plumbing project, even if it concerns tightening the toilet seat, you have to find all of the shut-off valves and have a good idea of what they control. In case you have a great system that was installed with careful consideration, you may have dedicated shutoffs for every bathroom that you have at home.

The majority of these valves are located in the basement but there are also those that are concealed behind access panels. In case you are not sure what a certain valve controls, just shut it off and begin turning on the faucets and flush the toilets.

Additionally, you need to also know where the main house shutoff is located. It is commonly located in the spot where the water line enters the house. Remember the fastest route to this shutoff valve.

Sweat Copper Pipe

Learning to sweat copper pipe is an essential skill for a modern plumbing and when you try it, you will be amazed at how simple it is. Of course, professional Myrtle Beach plumbing contractors know how to do this with their eyes closed. You just have to go to your local hardware store for flux, solder, a small torch, and a couple of copper pipes and you are good to go.

Understand Your House

Before you begin your plumbing project, even if it is a minor one, it is a good idea to know your plumbing system as a whole. Perform some research and understand the basic plumbing concepts like what role does the vent pipe play, the right size of the drain lines, and the pitch requirements of a waste pipe. Then use what you have learned in your own house and map out your plumbing system. You need to know where the main waste line will leave the house and which walls have pipes inside. Your DIY plumbing project will be less intimidating if you have more information. It will also be easier for you to address any plumbing problem.

Call Blue Ribbon Plumbing if would rather have a plumbing professional deal with all your plumbing problems.

Blue Ribbon Plumbing LLC
4201 Carolina Exchange Drive Suite 202
Myrtle Beach, SC 29579
(843) 267-9733
http://www.blueribbonplumbingmb.com/